Finishing
Make sure the walls and/or boards are smooth, solid, dry and free of mould or
algae.
Leave approximately 4-5 cm extra at ceiling and skirting board.
Check the material after cutting 3 lengths on colour consistency and surface texture
as claims over 3 lengths may not be accepted.
Remove all old wallpaper, paint or whitewash and traces of inks or crayon.
Forming
Use a suitable PVA dispersion adhesive for non-woven fleece wallpaper (heavy
wallpaper).
Diluted PVA adhesives can be used as a primer on porous and absorbing surfaces.
Mark a perpendicular line so that the first length can be hung at 2 cm through the
corner.
Apply an even layer of adhesive with a lambs wool roller or block-brush on the wall.
Apply the paper to the wall.
Use a squeegee or roller to smooth out the length in vertical direction. Be careful
not to damage the image by applying high pressure with the squeegee.
Butt join or overlap the lengths by 5 cm.
Discover more
350g Heavy Weight Non-woven fleece backed wallcovering with an embossed vinyl Fine Sand finish. Easily applied by pasting the wall and applying dry. Solvent / UV & Latex print compatible
Pack and
size options
Suitable for
Applications and
guarantees